MX series test stands offer consistent testing and force control capability. The combination of screw drive system and state-of-the-art brushless motor provides extremely smooth and powerful operation over the entire speed range.
Connect the MX series test stand with an Imada Z Series force gauge to enable force controlled testing and Conditional Overload Prevention.
High/Low Set Point Force Control
Force control is activated when the applied force is at or between the high and low set point(s) of the Z Series force gauge and is deactivated by the digital timer. Initial carriage speed is controlled by the variable or fixed speed settings.
One Way Force Control
Initial carriage speed is controlled by the variable or fixed speed settings. When the applied force reaches the low set point of the Z Series force gauge, the test stand’s carriage speed is adjusted to 20% of maximum and decreases to zero as the applied force reaches the high set point. Ideal for non-destructive testing.
|Capacity||500N (50kgf)||1000N (100kgf)||5000N (500kgf)|
|Stroke when a force gauge is mounted(*1)||235mm||410mm||305mm|
|Test speed||10 to 300mm/min||8 to 240mm/min||10 to 300mm/min|
|Gauges that can be combined (*2)||Any force gauges except high capacity model force gauges||Mechanical / Digital Force gauges|
|Compression sensors can NOT be combined.|
|Function||Manual mode, Single mode, Continuous mode|
|Control||Emergency button, Operation control by load value(*3), Overload prevention(*3)(*4)|
|Safety devices||Stroke limit, emergency stop button|
|Power||AC100V to 240V, free input|
|Size||Please refer to dimensions.|
|Weight||Approx. 13kg||Approx. 24kg||Approx. 30kg|
|Option||Long stroke, Speed range change, Encoder|
|Accessory||Grip mounting adapter(GF-1)||Grip mounting adapter(GF-2)|
|Instruction manual, Power cable, Gauge mounting plate, Cover, Spare fuse, and Tools.|
*1 Stroke is, in other words, max distance from the tip of a Z series force gauge to a test stand table.
*2 Please contact us if you would like to combine other force gauges or load cells with the test stand.
*3 Only valid with Z series digital force gauge and dedicated cable.
*4 We cannot ensure prevention against sensor break-down.